Importing Registered Projector Information from the Epson Projector Management Software

You can transfer registered projector information from the Epson Projector Management software.

  1. Save the projector log file from the Epson Projector Management software to the computer on which you will use the Epson Projector Connected Agent software.

    • See Saving Projector Log Files in the Epson Projector Management Operation Guide for details on acquiring the projector log file.

      To acquire log files, select Projector Info on the Log Save settings screen.

    • Epson Projector Management Ver. 5.43 or higher is required to use this function.

  2. Select Start, and then select Epson Projector Connected Agent on your Windows computer.

  3. Right-click EPMC_Agent, select More, and then select Run as administrator.

    The Epson Projector Connected Agent software starts.
  4. Select File.

  5. Click Select.

    The file selection screen is displayed.
  6. Select the log file you saved from the Epson Projector Management software.

    If a file reading error occurs, check that the file is in the following format.

    • Data format: csv

    • Delimiter: comma

    • Character code: UTF-8 (with BOM)

    • Line feed code: CRLF

    Also, check that the following columns contain the necessary information.

    • IPaddress: Projector's IP address

    • Password: Projector's password

    You can also create and import your own log file, as long as  the file meets the format requirements indicated above.

Registered projectors are displayed on the right side of the Epson Projector Connected Agent main screen.

  • If you want to monitor more than 2000 projectors, you will need to set up a new computer for every 2000 projectors.

  • The Epson Projector Management software cannot be started if the Epson Projector Connected Agent software is installed on the same computer. We recommend uninstalling the existing Epson Projector Management software from your computer when you have finished setting of the Epson Projector Connected Agent software.

  • To change or remove the information for a registered projector, select its check box on the right side of the Epson Projector Connected Agent main screen, right-click the projector, and then select the appropriate menu.